Season opener in Lünen

My Gambler cornering hard (pic by Anja Fuhrmann)

This years racing-season kicked off on the MMW-Lünen indoor facality on a rather small but well layed out carpet track.

To be honest - I never liked indoor-carpet offroad racing and I probably never will. So I came there with no training and only little preparation. I did not drive very well, ending up 14th overall was not great, but securing me some points, which will come handy at the end of the season.

Looking very much forward now to the first outdoor-race on my favourite club-circuit in Troisdorf on the 8th of April.

Another last race

Last weekends race took me to the nearby Duisburg track for the last outdoor-race of the season and also for the last ever race on this track. The RCRT Duisburg club-track has to close down after over 25 years because a youth-hostel will be built on this place. I raced there since the very beginning and I was there on the last event. Quite a sad occasion, but a very nice one as well.

Weather was perfect and so was the track. Competition was very close and to qualify 3 seconds slower meant you find yourself 5 or 6 places down the leaderboard.

I was missing some speed the whole day, cause my 17.5T Speedpassion was not able to keep up with some of the more tunable 17,5 out there.

The Gambler was doing fine but I missed the A-final and only showed a very average performance in the B.

@ Venom: The interest in my Truck was very good once again. If only it was available over here...could be a winner. *hint...hint* ;-)

So that was it for outdoor racing this year. I was never to keen on indoor-gym-tracks, which are quite common over here. So I am not sure when the Gambler will hit the track again.

In the meantime - take care and keep on racing!
Jörg

Last Race of NRW Offroad Cup Series

On the Weekend of 17th/18th of September the final race of the NRW Offroad Cup-series took part on the grippy and very demanding track in Langenfeld in the west of Germany.



YESS - it has a new Venom-bodyshell, which is sporting my trademark Gulf-Racing design...at least a bit of it. ;-)

My Gambler got a complete overhaul before the race. Not only the modified bumper and the Venom aluminium steering upgrade. It also got a new Savöx low-profile Servo. I also tried a new set of Traxxas big-bore aluminum shocks. These worked extremely well. The front-shocks are 8mm shorter than the original Gambler shocks. The rears are 3mm shorter, which reduced droop significantly and gave the car a much sharper turn in. The Traxxas supplied 30WT oil was a bit on the firm side. But as it was a high grip track I left it this way and was very happy with it.

The Truck was working extremely well and gave me very quick laptimes and rocket-like starts every time. Sadly the receiver let me down a couple of times. The fail-save stopped the truck in 3 of the 5 runs, which cost me 2 to 3 laps on each occasion. I was not able to solve that because I had no spare receiver, so I had to take it like it is.

So at the end it was only a bad 16th place. But I was not unhappy, because I knew the Truck was great and it could have done much better.

I hope I am able to do another outdoor-race before the outdoor-season closes for this season. I would love to take the Gambler on the podium at least once this year.

Gambler bumper mod

Stock Gambler bumper

Another significant change I wanted to do for a long time was the front-bumper.

The bumper of the original Gambler faces downward, This gives the front part of the chassis very high stress when landing on the nose after a jump or so. And when you get the landing completely wrong, the bumper nearly digs into the ground which unsettles the truck a lot.

I wanted to modify the bumper in a way that it helps the chassis over obstacles and guides it into the right direction when landing after a jump. So the bumper should face upwards.

This is very easy to do with the Gambler. I was wondering why this mod hasn't been done by more Gambler owners.

1. unscrew the bumper from the chassis and seperate it from the guide-plate (which can stay attached to the chassis)
2. turn around the bumper a 180 degrees and bolt it onto the front shock-tower as it was before.
3. drill two holes in the bumper just where the holes in the guide-plate has them and screw in two self-tapping screws. (golden in that pic above for better visibility)
4. ready to rumble!

This is how it looks like after the mod.

Of course you have to modify the body a little bit at the front to clear the new bumper. I think this sleek look even enhances the look and makes it more aggressive.



Cost of this bumper-mod:
2 screws, 10 minutes of your time and just a tiny little bit of brain-power.


Edit: After the first race with the new bumper, I can say that it worked very well and it didn't let me down in any way. So I can really recommend it.

Gambler steering update

Finally I got the latest edition front- and rear-arms for the Gambler, together with the great aluminium steering set, which should remove whe steering-wobble I was fighting with from the beginning.

I can say, that aluminium-set did the job. Fantastic!

But I am just as happy to have original Venom Gambler front arms installed again. I was running with HPI Blitz front arms because my old generation arms were broken and the new ones were not available. It did work ok, but not as good as the Gambler-arms, because the geometry was changed slightly and I was missing the cornering-stability I had before. Especially on the high grip astro-turf tracks we have out here in Germany. Now everything is fine as it should be and the new front arms feel much more rigid than the old ones. Looks great - feels great - perfect!

Thanks a lot to Rick and Clint from Venom!

Race Report from Geilenkirchen

This Sunday the NRW Offroad Series  took place in Geilenkirchen on another Astro-Turf track.

The very hard track (and some opponents) tortured the Gambler a lot, but everything went flawlessly. Nothing broke, despite other cars having a lot of problems with parts breakage.

Came home 4th after holding the 3rd spot all day but losing it by 3 secs in the last run.

Ran Proline Bow Tie M3 tires all round on Proline-Wheels.

Shocks were filled with 40WT front and 60WT rear. Orange Losi springs all round.

I was again using the modified Blitz front arms and 1.5° aluminium rear hub.

I will miss the next race due to a well earned holiday break, but I'll be back racing at an international race in Holland.at 17th of July.

The Real Deal?

Found this one on Venom's Facebook-site:


Venom's been sponsoring Jonathan Elkins #32 Pro Lite truck. Check out his truck in all new Venom Gambler graphics!